HENAN QUANSHUN FLOW CONTROL SCIENCE & TECHNOLOGY CO.,LTD.

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

fixed type ball valve
Specification: Size£º2¡±~16¡± Pressure£ºClass 150~Class 900 Structure Type£ºFixed ty
Detail: The ball valve is mainly used to control the pipeline and medium.The fixed ball valve is a kind of common product applied in the condition with high pressure and large diameter for the medium like water,steam, oil and other k...

floating ball valve
Specification: Size£º2¡±~8¡± Pressure£ºClass 150~Class 300 Structure Type£ºFloating
Detail: The floating ball valve is a kind of common product in the industry. Specially provided for the condition with low and middle pressure.This ball valve is applicable for water,oil,steam and other corrosive mediums. Features 1...

swing check valve
Specification: Size: 2¡±-16¡± DN50~DN400 Pressure: Class 150~Class300 PN1.0~PN6
Detail: The swing check valve is particularly developed to prevent the medium from backflow. This swing check valve can be used on the pipeline of the petroleum industry, chemical industry, hydraulic power industry to cut off or cont...

straight through globe valve
Specification: Size: 2¡±~16¡±DN50~DN400 Pressure: Class 150 ~ Class 2500
Detail: Straight through globe valve is a type of adopts a straight-through valve body and controls the medium flow by the disc moving up or down. This straight through stop valve is widely used for control of water, steam, oil and ot...

wedge gate valve
Specification: Size: 2¡± ~16¡± DN50~DN400 Pressure: Class 150~Class 1500
Detail: Wedge gate valve adpot wedge disc as closing part ,it is widely use in water, steam, oil, gas and other corrosive medium. The gate valve can also be used in the environment with high temperature and high pressure. Features 1...

tank bottom angle valve with washing pipe
Specification: Size: 2¡±~14¡± DN50~DN350 Pressure£ºClass 150~Class 600 PN1.0~PN
Detail: Size: 2¡±~8¡± DN50~DN200 Pressure£ºClass 150~Class 300 PN1.0~PN16 Body Material £ºWCB£¨A105), CF8(304), CF8M(316), CF3(304L), CF3M(316L) etc. Connection Type£ºFlange Driving Type£ºManual,bevel gear,pneumatic actuator

disc type tank bottom angle valve
Specification: Size: 2¡±~14¡± DN50~DN350 Pressure£ºClass 150~Class 600 PN1.0~PN
Detail: Disc Type Tank Bottom Angle Valve(referred to as Tank valve, Angle Bottom valve, Bottom drain valve, Flush mount valve etc) is designed to provide drainage and dead ***ce free shutoff for reactors, vessels, autoclaves and stor...

slurry valve
Specification: Size£º2¡±~14¡± DN50~DN350 Pressure £ºClass 150~Class 600 PN1.0~PN1
Detail: Featuring abrasion resistance,high pressure resistance,erosion resistance and anti-scaling performance,the slurry valve is specially offered for controlling or shutting off the slurry.The slurry valves are widely used at alumi...

side entry segment ball valve
Specification: Size£º 2¡±-56¡± DN40-DN1400 Pressure£ºClass 150-Class900 PN6-PN40
Detail: Side Entry Segment Ball Valve is a high performance valve we have developed with advanced technology.It also called eccentric ball valve ,semi ball valve ,half ball valve ,C type ball valve and E type ball valve .It is designe...

spherical disc butterfly valve
Specification: Size £º2¡±~40¡± DN50~DN3000 Pressure£ºClass 150~Class 300
Detail: Spherical disc butterfly valve is developed combined with the advantage of the butterfly valve and segment ball valve . The special disc butterfly valve can be used at inlet and outlet of the water pump,piping network system,r...


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1